Joyous Oscillator

ZPE Series 3.3VDC PECL Oscillator


Electrical Specifications

Parameter Specification
Frequency Range 9.600MHz to 35.000MHz
Frequency Stability

All Measurements Inclusive of Operating Temperature Range, Supply Voltage, Load & Aging

±100ppm Maximum
±50ppm Maximum
±25ppm Maximum or
±20ppm Maximum

Duty Cycle

50% ±10% (Measured 50% of waveform)
50% ±5% (Optional)

Operating Temperature Range 0°C to +70°C or
-40°C to +85°C (Not available with ±25ppm or ±20ppm)
Storage Temperature Range -55°C to +125°C
Supply Voltage (VCC) 3.3VDC ±5%VDC
Output Load 50 Ohms into VCC -2.0VDC
Supply Current 80mA Maximum
Output Voltage Logic High (VOH) VCC -1.2VDC Minimum
Output Voltage Logic Low (VOL) VCC -1.5VDC Maximum
Rise Time / Fall Time

Measured over 20% to 80% of Waveform
3nSec Maximum


Pin Connection

Pin #

Connection
1 Control Voltage (Not Present When Control voltage is specified as No Connect)
2 Case Ground
3 Output
4 Supply Voltage

Part Numbering Guide

ZPE 00 A 1 CP B - 20.000 M
                Frequency Unit of Measure
M = MHz
              Frequency
Entire Frequency with Decimal
            Frequency Prefix
          Power Supply
B = 3.3VDC ±5%
       

Pin 1 Connection
CP = Complimentary Output
NC = No Connect

      Duty Cycle
1 = 50% ±10%
2 = 50% ±5%
    Operating Temperature Range
A = 0°C to +70°C
B = -40°C to +85°C
  Frequency Deviation
00 = ±100ppm
50 = ±50ppm
25 = ±25ppm
20 = ±20ppm
Series
ZPE

 

Back to the Joyous Crystal Products Home Page


(714) 435-9530 ~ (714) 435-9705 FAX ~ anodyne@earthlink.net