Joyous Oscillator

ZMA & ZNA Series 14 & 8 Pin DIP 5.0VDC

This Joyous "Sonic Series" is designed for our cost conscious customers who demand quick turn production without quick turn prices. Standard and custom specifications are available in as little as three days.


Electrical Specifications

Parameter Specification
Frequency Range 1.000MHz to 155.520MHz
Frequency Tolerance/Stability

All Measurements Inclusive of Operating Temperature Range, Supply Voltage & Load

±100ppm Maximum
±50ppm Maximum
±25ppm Maximum
±20ppm Maximum

Duty Cycle (@VDD=5.0VDC)

50% ±10% Measured at 1.4VDC with TTL Load or at 50% of waveform with HCMOS Load from 1.000MHz to 70.000MHz

50% ±10% at 50% of waveform with TTL Load or with HCMOS Load from 70.001MHz to 155.520MHz

50% ±5% (Optional) at 50% of waveform with TTL Load or with HCMOS Load

Operating Temperature Range 0°C to +70°C
-40°C to +85°C
Storage Temperature Range -55°C to +125°C
Supply Voltage (VDD) 5.0VDC ±10%
Aging (at 25°C) ±5ppm/year Maximum
Load Drive Capability

50pF HCMOS Load from 1.000MHz to 70.000MHz
15pF HCMOS Load from 70.001MHz to 155.520MHz

10TTL Load Maximum from 1.000MHz to 70.000MHz
5TTL Load Maximum from 70.001MHz to 155.520MHz

Input Current 50mA Maximum
Output Voltage Logic High (VOH>/sub>) 2.4VDC Minimum with TTL Load (IOH = -16mA)
VDD-0.4VDC Minimum with HCMOS Load (IOH = -16mA)
Output Voltage Logic Low (VOL) 0.4VDC Maximum (IOL = +16mA)
Rise Time / Fall Time

Measured over 0.8VDC to 2.0VDC with TTL Load or 20% to 80% of Waveform with HCMOS Load

6nSec Maximum from 1.000MHz to 70.000MHz
4nSec Maximum from 70.001MHz to 155.520MHz

Input Voltage (Pin 1)

VIH: +2.2VDC Minimum or No Connect to Enable Output
VIL: +0.8VDC Maximum to Disable Output (High Impedance)

Start Up time 10 mSec Maximum
Absolute Clock Period Jitter ±250pSec Max., ±100pSec Typical
One Sigma Clock Period Jitter ±50pSec Maximum, ±30pSec Typical


Mechanical Dimensions

14 Pin DIP Oscillator
14 Pin Dip

 


8 Pin DIP


Pin Connection

Pin #
( 14 Pin DIP / 8 Pin DIP)

Connection
1 / 1 Tri-State
7 / 4 Ground / Case Ground
8 / 5 Frequency Output
14 / 8 Supply Voltage

Part Numbering Guide

ZMA 00 A 1 TS A - 20.000 M
                Frequency Unit of Measure
M = MHz
              Frequency
Entire frequency with decimal
            Frequency Prefix
          Power Supply
A = 5.0V ±10%
        Pin 1 Connection
TS = Tri-State
      Duty Cycle
1 = 50% ±10%
2 = 50% ±5%
   

Operating Temperature Range
A = 0°C to +70°C
B = -40°C to +85°C

  Frequency Deviation
00 = ±100ppm
50 = ±50ppm
25 = ±25ppm
20 = ±20ppm
Series
ZMA = 14 Pin DIP
ZNA = 8 Pin DIP

 

Back to the Joyous Crystal Products Home Page


(714) 435-9530 ~ (714) 435-9705 FAX ~ anodyne@earthlink.net